With the Juniper Alerts Monitoring SNMP template, you will be able to monitor “Relay mode”.
The alarm relay mode of the craft interface panel for both yellow and red alarms. A front panel Alarm Cutoff / Lamp Test (ACO/LT) button could cut yellow and red alarms.
In pass-on mode, the alarm relay will be activated to pass on the yellow or red alarms, while in the cut-off mode, both yellow and red alarms will be cut off from the alarm relays normally connected to audible sirens or visual flashing devices.
You’ll also have the Yellow and Red Alarm State on a different line.
You can find this script in our library.